Feedrjs

Loose Moissanite Prong? Retipping, Tightening and What It Costs

My moissanite is loose in its setting — what is actually wrong?

Almost always the prongs, not the stone. Moissanite is one of the hardest gem materials used in jewelry, and it does not shrink, soften, or wear out of its setting. What wears out is the metal holding it. A prong tip that has thinned from years of daily contact loses its grip, the stone starts to rock, and eventually it drops. Retipping rebuilds that tip. It is a small, inexpensive repair — and it is the single most effective thing you can do to avoid losing the stone.

There is one moissanite-specific rule that a general bench may not know, and it matters: colour-treated moissanite cannot be torch-retipped with the stone in place. Torch heat strips the colour treatment. That work requires a laser welder. Everything else about the repair is ordinary prong work.

The four signs your prongs are going

  • The stone moves. Press the stone gently with a fingernail. If it rocks, spins, or clicks, the setting is no longer holding it.
  • Flat prong tips. A healthy prong tip is a small rounded claw curling over the stone. A worn one looks flattened, shaved down, or squared off.
  • It snags. A prong that catches on sweaters, hair, or upholstery is usually a prong that has worn into a sharp edge rather than a smooth curve.
  • You can see light under the prong. A visible gap between the prong and the girdle of the stone means the prong is no longer in contact where it should be.

If any of these are true, stop wearing the piece. A loose stone is a lost stone, and jewelry insurance treats a stone that fell out of a known-worn setting very differently from accidental damage.

Retipping, rebuilding, or a new head — which one you need

Condition Repair What happens at the bench
Tips thinned but prong body is sound Retipping New metal is added to the tip and re-shaped over the stone
Prong worn well down the body, or bent Prong rebuilding More metal is added further down and the whole prong is re-formed
Several prongs gone, or the basket is cracked Head replacement The entire setting head is removed and a new one is fitted
Stone moves but prongs look fine Stone tightening Prongs are re-seated and burnished down onto the stone, no new metal

Our full breakdown of what each one costs is in the prong retipping cost guide — about $5-$12 per prong in 2026, with rebuilding and head replacement priced higher. Every piece is quoted in writing before work begins.

The heat question, answered properly

This is where moissanite repairs go wrong, and it is worth being precise rather than cautious-sounding.

Moissanite is silicon carbide. It is harder than sapphire and ruby, and its melting point is far above anything a jeweler's torch produces. For ordinary soldering and sizing, moissanite is a more forgiving stone than most coloured gems — you do not need to unset it the way you would an emerald or an opal.

The exception is colour treatment. Some moissanite is colour-enhanced, and that treatment is heat-sensitive in a way the underlying crystal is not. Torch heat applied directly to a treated stone during retipping can shift or strip the colour permanently. The fix is not to refuse the work; it is to do it with a laser welder, which puts a controlled weld on the prong without heating the stone.

A bench that does not ask whether your stone is treated is a bench that is guessing. If you are not sure what you have, say so when you request the repair and the evaluation will cover it. There is more on the underlying material behaviour in our moissanite repair guide.

What a prong repair looks like at RJS, step by step

  1. Evaluation and written quote. The piece is inspected under magnification, every prong is assessed, and you get a written price before anything is touched.
  2. Stone check. We confirm whether the moissanite is treated, which decides torch versus laser.
  3. Metal work. Retipping, rebuilding, or a new head, matched to your alloy so the repair does not show as a colour difference.
  4. Re-seating and tightening. The stone is re-seated and each prong burnished down onto the girdle.
  5. QC and refinish. Multi-stage inspection, then polishing so the repaired area matches the rest of the piece.
  6. Insured return. Every piece is covered end to end under our Lloyd's of London Jewelers Block Policy.

If your piece is a Charles & Colvard

RJS is an authorized Charles & Colvard repair partner, and prong work on Charles & Colvard moissanite is one of the most common jobs on our bench. If you are wondering where warranty coverage stands after the brand's 2026 ownership change, that page covers it. The short version for prong work specifically: retipping and stone tightening were paid repairs before the bankruptcy as well, so there is nothing to wait for.

Frequently asked questions

Forever One moissanite loose prong — can it be repaired? Yes. A loose Forever One or other Charles & Colvard moissanite is nearly always a worn or bent prong, not a damaged stone. The fix is retipping or rebuilding the prong and re-seating the stone. The moissanite itself is almost never the part that failed.

How is moissanite prong retipping different from diamond prong retipping? The metal work is the same. The difference is heat. Untreated moissanite tolerates normal torch work, but colour-treated moissanite must not be torch-retipped with the stone in place, because torch heat strips the colour treatment. That work has to be done with a laser welder.

How much does prong retipping cost? RJS prices prong retipping at about $5-$12 per prong in 2026, depending on the metal and how much rebuilding each prong needs. Head replacement costs more. Every repair is quoted in writing before any work starts.

How do I know if my moissanite prongs need retipping? Four signs: the stone wiggles or spins when you press it, prong tips look flat or thin instead of rounded, the setting snags on fabric and hair, or you can see daylight between a prong and the stone.

Can I keep wearing a ring with a loose moissanite? No. A stone that moves is a stone that can fall out, and the loss is usually not covered the way a repair is. Stop wearing the piece and get it evaluated.


Related: Moissanite Repair Guide - Prong Retipping Cost - Charles & Colvard Authorized Repair - Start a repair

START YOUR REPAIRCONTACT US