Chipped Moissanite? How to Tell Real Damage From Three Look-Alikes
Yes, a chipped moissanite can usually be dealt with — but most stones brought in as chipped are not chipped at all. Three things get mistaken for damage: a stubborn surface film, the doubled facet edges that moissanite naturally shows because it is doubly refractive, and heat damage from an earlier repair. Only one of those is a chip, and only one of the three is permanent. Get the stone identified under magnification before you authorise anything, because the cheapest outcome on this list is a clean.
Moissanite is silicon carbide and sits at 9.25 on the Mohs scale — harder than sapphire or ruby and second only to diamond. Genuine chips happen, but they come from a hard, direct impact against something harder or an edge-on knock, not from ordinary wear.
The four-way diagnosis
| What you are seeing | Most likely cause | How a bench tests it | What it takes to fix |
|---|---|---|---|
| Overall haze or dullness that improves when you breathe on it and wipe | Oils, lotion, soap and hard-water film on the crown and pavilion | Ultrasonic clean and steam | A professional clean and polish, $39–$60 |
| Blue or brown spots, or an oil-slick sheen, that survive a normal clean | A specific film Charles & Colvard documents in its own bench guidance | Hot-solution bench decontamination, then re-inspect | Bench clean, then re-evaluate — no repair needed |
| A hairline that looks like a crack running off a facet junction | Doubled facet junctions. Moissanite is doubly refractive, so facet edges appear duplicated | Rotate under a loupe: a doubled edge shifts with the viewing angle, a fracture does not | Nothing. It is the stone's optics, not a flaw |
| A notch or missing sliver at the girdle or a facet junction that catches a fingernail | A genuine chip from a hard impact | 10x loupe plus the fingernail test | Re-cut, conceal in a new setting, or replace |
| A milky stone with no fire left that will not clean up | Overheating during an earlier repair | Side-by-side comparison with a neighbouring stone | Replacement. Heat damage is permanent |
That third row is the one almost nobody explains. Moissanite has two refractive indices, 2.648 and 2.691, and that double refraction makes facet junctions look duplicated when you look into the stone off-axis. It is the same property gemmologists use to separate moissanite from diamond. On a large stone it reads convincingly as a crack, and it is not one.
Before you call it a chip: the clean
Charles & Colvard's own guidance for jewellers is explicit that a moissanite should be thoroughly cleaned before anyone judges it, and it describes the stubborn film by name.
- Start with ultrasonic and steam. This removes the normal dirt and oils found on worn jewellery.
- Look again. What is often revealed underneath is blue or brown spotting or an oil-slick sheen — a film the standard method does not touch.
- Escalate to a heated solution. The published method uses a heated beaker with a magnetic stirrer held at roughly 190 to 200 degrees, with the piece suspended for about 45 minutes to an hour.
- Rinse and steam. This restores the brilliance the stone is known for.
- Then evaluate. Only after the stone is genuinely clean is a chip assessment worth anything.
This is bench work, not a home remedy.
Check the warranty before you book the repair
This is where most advice on chipped moissanite gets it backwards. The Charles & Colvard Limited Lifetime Warranty does not only cover manufacturing defects in the abstract — its published terms cover the physical integrity of the moissanite including chipping, breaking, scratching and abrasions, and the optical properties including brilliance and fire.
So a chip may be a claim rather than a bill, if all of the following hold:
- The gem is authentic Charles & Colvard Created Moissanite 4mm or larger.
- The purchase was registered. Without registration there is no remedy.
- The damage did not result from abuse or misuse, which the terms exclude. A hard impact is the grey area here, and the judgement belongs to the warranty administrator, not to a bench.
If those hold, document the stone and route the claim before any jeweller works on it — the same terms treat third-party alterations or treatments to the gemstone as voiding the warranty. If they do not hold, it is a paid repair and you are choosing on bench skill.
One complication: after Charles & Colvard's 2026 Chapter 11 filing and the court-approved sale of its assets to AJS Creations, the registration address written into the warranty text no longer resolves — the live route is the service portal. RJS is an authorized Charles & Colvard repair partner and accepts Charles & Colvard warranty-covered claims; that word applies to Charles & Colvard and to no other brand we service.
The three remedies for a confirmed chip
| Remedy | When it is the right call | What RJS publishes for the bench work |
|---|---|---|
| Re-cut or re-polish the stone | Small chip at the girdle or an edge facet, where removing it costs little weight | Quoted after evaluation — depends on chip position and how much weight comes off |
| Conceal it in a new setting | The chip sits where a prong, a bezel edge or a re-orientation can cover it | Re-setting a customer's own stone runs $40–$150 depending on stone size, shape and setting type; prong retipping is $5–$12 per prong |
| Replace the stone | Larger chips, chips through the table or centre, or any heat-damaged milky stone | Setting labour again $40–$150; the replacement gem itself is quoted after evaluation because it has to be matched to the original's size, cut and colour grade |
Two honest notes. Re-cutting always costs some carat weight, so it is not free even when it is possible. And the stone itself is not a published price: moissanite comes in defined colour and cut grades, and an unmatched replacement reads as obviously different beside its neighbours.
If the piece is coming apart for a stone swap anyway, approve the neighbouring work in the same visit — stone tightening runs $10–$25 per stone. Where heat has to go near a remaining stone or a colour treatment, the work is laser welded rather than torch soldered.
What to do, in order
- Stop wearing it. A chipped girdle edge is a stress point, and a loose stone in a damaged setting is how stones get lost rather than repaired.
- Photograph it in good light, from several angles, before it leaves your hands.
- Get it cleaned and inspected under magnification — not quoted from a phone photo.
- Check registration and size against the warranty terms before authorising bench work on the stone.
- Ask for the evaluation in writing. RJS evaluates free and quotes in writing before anything happens, and the evaluation says which of the four diagnoses above it actually is.
- Ship insured and tracked both ways. Standard bench turnaround at RJS is 5 to 10 business days — stone tightening 1 to 3 days of that, a resize with stones present 3 to 7. Mail-in runs 2 to 3 weeks door to door, including 2 to 5 business days of insured transit each way, under a Lloyd's of London Jewelers Block Policy with 100% chain-of-custody tracking.
FAQ
Can a chipped moissanite be repaired?
Often, yes. A small chip at the girdle or an edge facet can sometimes be re-cut away, and a chip in the right position can be concealed by a prong, a bezel edge or simply re-orienting the stone in a new setting. Larger chips, chips through the table or centre, and any stone that has gone milky from overheating are replacement cases rather than repair cases. The decision needs the stone clean and under a loupe first, because a surprising share of reported chips turn out to be surface film or the doubled facet edges moissanite shows naturally.
Is my moissanite chipped or just cloudy?
Cloudiness is almost never damage. Oils, lotion, soap and hard-water minerals build up on the crown and pavilion and kill light return, and Charles & Colvard's own bench guidance describes a further blue, brown or oil-slick film that survives ordinary cleaning and needs a heated-solution bench clean to shift. A real chip is a notch or missing sliver at a facet junction or the girdle that catches a fingernail and does not change with cleaning. If an ultrasonic and steam clean restores the fire, there was nothing to repair.
Is a chipped moissanite covered by the Charles & Colvard warranty?
It can be. The published Limited Lifetime Warranty covers the physical integrity of the moissanite including chipping, breaking, scratching and abrasions, for authentic Charles & Colvard gems 4mm or larger, provided the purchase was registered. It explicitly excludes damage resulting from abuse, misuse, loss or theft, which is where a hard impact can be argued either way. Because the same terms treat third-party alterations or treatments to the gemstone as voiding the warranty, document the stone and route the claim before having any bench work on it.
Does a chipped moissanite mean the stone is low quality?
No. Moissanite is silicon carbide at 9.25 on the Mohs scale — harder than sapphire and ruby, and second only to diamond among stones used in jewellery. Hardness resists scratching, which is a different property from toughness, so any brittle gem including diamond can chip on a hard, edge-on impact. A chip is evidence of a bad knock, not of a bad stone, and it says nothing about the grade of the gem.
How much does it cost to replace a chipped moissanite?
The bench work is the published part: setting a customer's own stone runs $40–$150 depending on stone size, shape and setting type, with prong retipping at $5–$12 per prong and stone tightening at $10–$25 per stone where the setting also needs attention. The replacement gem itself is quoted after evaluation rather than from a list, because it has to be matched to the original stone's size, cut and colour grade — an unmatched replacement is visible next to its neighbours. If the stone is still under a registered Charles & Colvard warranty, check that route first, because replacement at no charge is the warranty's own stated remedy.
RJS — Repair Jewelry Solutions has been a repair facility since 2002 and is an authorized Charles & Colvard repair partner. Every repair is quoted in writing after a free evaluation, moves under 100% chain-of-custody tracking, and is insured under a Lloyd's of London Jewelers Block Policy. See the moissanite repair guide for bench technique, our Charles & Colvard authorized repair page, what stone tightening costs, or how to weigh repair against replacement.
